Please note that if you stamp on the face of the shirt and then press for rotation it the stamp will stay on the face and will not be displayed on the back. This is because the design that you create specifically applies to the face or back of the product. In other words they are two different mutually independent designs. Please pay attention that if you have placed the imprint of the face of the product and put print and on the back, the price for your order will increase. This is because your order to actually add additional second printing. The value of this additional printing with a percentage discount of the base price for printing.

you will be able to:

- To select print from the catalog of the site through the "Select Category"
- To position in the box a print chosen by you print by clicking on "Positions"
- To reorder display of prints (or text) if they have two or more buttons by "Paste above" and "Paste below"
- To remove already placed print, using the buttons "Remove selected item"
- To upload and place it on the T-shirt image from your computer by clicking "Upload Image"

  1. "Select Category"
 Read...  After selecting category will appear on a panel with all currently available prints in it. You can drag panel in a chosen position on the screen. When you select print and click on it, panel prints will close and the chosen print will be displayed on the shirt. If you do not select print close the panel by closing icon in his right upper corner.

  2. "Positions"
 Read...  After pressing the button will appear panel "position control". You can drag panel in a chosen position on the screen - "Left" use to paste the selected pre-print close to the left edge of the print area
- "Right" use to paste the selected pre-stamped close to the right edge of the print area
- "Up" use to paste the selected pre-stamped firmly to the top of the print area
- "Down" use to paste the selected pre-print close to the bottom of the print area
- "Center" use to paste the selected pre-print right in the center of the print area
Use combinations with consistent use of buttons to position the selected print anywhere on the print. If you want to close the panel, use the icon in closing his right corner.

  3. "Paste on top" and "Paste on bottom
 Read...  If on the print you have two or more prints (or test) You can rearrange them by means of these two buttons. So you can combine more than two prints, especially if there is at least one transparent areas. For this purpose, select the stamp (the object) on which you want to apply the action and press the corresponding button.

  4. "Remove the selected item"
 Read...  To remove from print area already installed stamp, select the stamp you want to remove and click "Remove selected object."

  5. "Upload Image"
 Read...  To upload and put on his shirt image (picture) it must comply with several requirements: - Allowed file extensions are .jpg and .png
- The file must be at least 150 dpi and size of 1920px 2412px On the same time you can upload only one of yours image (photo) on T-shirt.

you will be able to:

- To write text and put it on the shirt
- To change its color
- To change the font via the dropdown font
- To control background, outline and height of lines of text, press "control test"
- To position the text in print area through the button "Open Positions"
- To change the order of display text (or prints) if they have two or more images buttons by "Paste above" and "Paste below"
- To remove the text form print area using buttons "Remove selected item"

  1. Load text
 Read...  Initially in print area is automatically generated text "Text". Delete it and type in its place whatever you like. Each time you press the button "Paste text" the text that appears in text box will be placed on the print area. You could place one letter at a text, which will allow you subsequently to change the color and / or size of individual characters (symbols). Whenever you select a single text or symbol placed on the print area, they appear in the text box, ready for editing, if needed.

  2. Color text
 Read...  The selected default text color is black. You can change it as you have previously applied to the printing and select text you want to change the color. Then click on the color icon, click to select a color from the appeared palette and press the button "Choose". So the color of the selected text will be replaced with the chosen new color.

  3. Font
 Read...  The selected default font is Helvetica. You can change it as you have previously applied to the print area and highlight the text you want to change the font. Then select from the dropdown font that you like and it will be applied to text.

  4. Background, outline and height of rows
 Read...  By default, on the text there is no background and contour. Upon pressing the "Text Control" will appear panel "TEXT CONTROL". On this panel you have the ability to control: - Whether the text has a background and what is its color
- Whether the text there is contour and what is the size and color
- What is the font size
- What is the height of rows
To cancel already supplied background and / or contour, select the venue in box to remove the option.

  5. "Positions"
 Read...  After pressing the button will appear panel "position control". You can drag panel in a chosen position on the screen. - "Left" have been used to place pre-selecting text against the left edge of the print area
- "Right" use to paste the selected text in advance against the left edge of the print area
- "Up" use to paste the selected text in advance against the left edge of the print area
- "Bottom" use to paste the selected text in advance against the left edge of the print area
- "Center" use to paste the selected text in advance against the left edge of the print area
Use combinations with consistent use of buttons to position the selected text anywhere on the print area. If you want to close the panel, use the icon in closing his right corner.

  6. "Paste above" and "Paste below"
 Read...  If you have two or more blocks text (object) on the print area, you can rearrange them by means of these two buttons. So you have the opportunity to combine more than two texts and prints. To do this, select the text (object) on which you want to apply the action and press the corresponding button.

  7. "Remove selected item"
 Read...  To remove the print area already placed text, select the text you want to remove and click "Remove selected object".

select a new color.
Default shirts are white. You can change the color with available colors will appear. Just click on the icon for the respective color and t-shirt will be replaced.

To benefit from this service, you must have created a profile. It will allow you to save on our server to six files (six of six prints and embroidery) to set up your designs. So when you need them you will be able to use them.
If you have no profile and want to create one, you can do so by clicking on the link "Create an account" and register with a valid email. On email will be sent you a letter of confirmation containing a link which will confirm exactly You are the owner of this email and complete your registration.

This will open a panel sizes available for specific t-shirt. Please note of the explanations for the size found in the left of the input field unit.
You can not add to cart the desired order if you do not include size and number.

Will appear on panel shows: - Product (T-shirt) you selected
- Shortly Image / her to set up by you design person and / or back
- The color of your chosen product (T-shirt)
- Number and size of your chosen product / s (shirt / s)
- Value (price) of your order
Please note if you see more than one number value shirt that will be displayed here will be generated discount. The discount will be applied according to the product of your piece.

If you agree with the details in this panel, click "Add to Cart" and your order will be added.
Otherwise just close this panel and continue working.